Performance
| ST2560-ACMW-i4 | |
| Max. Wire diameter | 60 mm |
| Electrode length | 300 mm |
| Electrode type | Brush |
| EHT test output voltage | 25 kV (rms) |
| EHT test output voltage resolution | 0.1 kV (rms) |
| EHT test output voltage accuracy | 2% |
| EHT test output capacitive current (at 25 kV) | 9 mA (rms) |
| EHT test output resistive current (at 25 kV) | 4 mA (rms) |
| EHT test output continuous short circuit current | 10 mA (rms) |
Connectivity
Safety interlock input to enable the EHT test output voltage
50 V maximum pulses, 250 kHz maximum frequency, user scalable
Maximum Input Voltage: 24Vdc Fixed function: Reset length, fault counts and positions
Isolated contacts, maximum rating: 50 VDC / 30 VDC / 0.5 A
Selectable Function: High Voltage Indication, Pin-Hole detected, Bare-Pitch detected, Pin-Hole or Bare Patch detected, Maximum fault count reached.
0 – 10 VDC; controls the EHT test output voltage, user scalable
0 – 10 VDC; proportional to the measured EHT test output voltage, user scalable
RS232 Modbus Communications
USB using RS232 – USB Converter Cable
ZM4000 Printer Communications
Connects to Proton Products CDi4 Display
Connect to a PLC using PROFIBUS, PROFINET, or EtherNet I/P, data update rate up to 500/sec. Flexible Data Configuration, Big Endian, Little Endian
Ethernet selectable between OPC-UA and Modbus
Connect to a PC or Mobile Device using WiFi 2.4G and use the Proton Products Gauge App available for iOS and Android. Ideal for gauge configuration and diagnostics
Electrical & operating Requirements
| Power Supply 85-265 Vac (rms) |
Power Consumption 400W |
Operating Temerature 5c – 45c (41-113F) |
Environmental Protection IP 54 |
Size & Weight
ST2560-ACMW-i4Height Width Thickness Weight |
