InteliSENS® SL mini-W Series
Speed & Length Measurement
The InteliSENS® SLmini-W Series non-contact speed and length measurement gauge has a Wide angle lens making it ideal for the measurement of curved surface products in “roll to roll” or “cut to length” processes. Wire, Cable, Hose, Tube, Pipe are good examples. Applications where speed measurement is critical for drive control or where length measurement is critical for product quality will benefit from the increased accuracy of Laser Doppler Speed and Length Measurement.
Get the Proton MDIS App
- No Slip, No Wear, No Marking of your product
- No Moving Parts, Increased Reliability and MTBF
- Incredibly small and easy to install
- Pulse outputs like your encoder
- Digital Communications you need
- Stand Alone Measuring Device or Fully Integrated to PLC
Product Videos
Accessories
SL/SLR mini Accessories
Displays
AiG2-SL/SLR
Display module
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2019/08/aig2sl-accessory.jpg”]
Proton part number: 00041MC045
[/x_block_grid_item]
[x_block_grid_item]
- Connects via the CAN-bus port.
- Displays measured speed and length.
- Provides menu-based setting of all parameters.
- Bright VFD dot matrix display.
[/x_block_grid_item]
[/x_block_grid]
CAN-bus cable
For connecting the gauge via a PSU-BOB mini to an CDi interface display unit
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2019/08/canbus-cable-accessory-sm.png”]
Proton part number: 00041MC045
[/x_block_grid_item][x_block_grid_item]
* Available in 1, 5, 10, 20, 40, 60 and 100m lengths.
[/x_block_grid_item][/x_block_grid]
| Name | Length / m | Proton part number |
|---|---|---|
| CAN 9DD_001 | 1 | 00041CB001 |
| CAN 9DD_005 | 5 | 00041CB005 |
| CAN 9DD_010 | 10 | 00041CB010 |
| CAN 9DD_020 | 20 | 00041CB020 |
| CAN 9DD_040 | 40 | 00041CB040 |
| CAN 9DD_060 | 60 | 00041CB060 |
| CAN 9DD_100 | 100 | 00041CB100 |
USB-RS232 Cable
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2019/08/usb-RS232-cable.png”]
Proton part number: GP00000624
[/x_block_grid_item]
[x_block_grid_item]
- For connecting the RS232 port of the PSU-BOB mini to the 7″Touch Screen PC.
- Length: 1.8m.
[/x_block_grid_item][/x_block_grid]
AiG2 Panel Mount Kit
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2015/02/00041MC049-180.jpg”]
Proton part number: 00041MC049
[/x_block_grid_item][x_block_grid_item]
- Bracket for mounting the AiG2 to an end-user panel.
[/x_block_grid_item][/x_block_grid]
PCIS_SL/SLR mini
PC Interface Software
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2014/05/PCiS-mini.jpg”]
Proton part number: 00050SW001
[/x_block_grid_item]
[x_block_grid_item]
- PC-based software package.
- User-friendly graphical user interface.
- Displays all measurements.
- Provides menu-based setting of all parameters.
- Provides trending, data logging, presets and alarms.
- Gauge to PC connection via RS-232.
[/x_block_grid_item][/x_block_grid]
7″ Touch Screen PC
Industrial PC
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2015/02/00043MC029.jpg”]
Proton part number: 00043MC029
[/x_block_grid_item]
[x_block_grid_item]
- For running the above PCiS_SL/SLR mini software
- Displays all measurements.
- Provides menu-based setting of all parameters.
- Provides trending, data logging, presets and alarms.
- Gauge to PC connection via RS-232 or optional RS-232-to-USB interface cable (RSCon).
[/x_block_grid_item][/x_block_grid]
[x_clear]
Power
DB25 Cable
For connecting the gauge “INTERFACE” port to a PSU-BOB mini.
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2014/05/DB25-cable.jpg”][/x_block_grid_item][x_block_grid_item]
* Available in 1, 3, 5, 10, 20 and 30 m lengths.
[/x_block_grid_item][/x_block_grid]
| Name | Length / m | Proton part number |
|---|---|---|
| BOB 25DD_001M | 1 | 00041CT001 |
| BOB 25DD_003M | 3 | 00041CT003 |
| BOB 25DD_005M | 5 | 00041CT005 |
| BOB 25DD_010M | 10 | 00041CT010 |
| BOB 25DD_020M | 20 | 00041CT020 |
| BOB 25DD_030M | 30 | 00041CT030 |
Terminal Expander
Gauge-mounted break-out box
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2014/05/Terminal-Expander.jpg”]
Proton part number: 00050MC036
[/x_block_grid_item]
[x_block_grid_item]
- Connects via the DB25 “INTERFACE” connector.
- Provides DB9 connector access to the RS-232, CAN-bus, Ethernet or optional industrial bus communications ports.
- Provides screw terminal access to all electrical input and output pins.
- End user cables are sealed with cable glands.
[/x_block_grid_item][/x_block_grid]
PSU-BOB mini
Power supply, break-out box and laser safety key switch
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2014/05/PSU-BOB-mini.jpg”]
Proton part number: 00050MC039
[/x_block_grid_item]
[x_block_grid_item]
- Connects via the DB25 “INTERFACE” connector.
- Supplies 24VDC electrical power to the gauge.
- Provides DB9 connector access to the RS-232, CAN-bus and optional industrial bus communications ports.
- Provides RJ45 connector access to the Ethernet port.
- Provides screw terminal access to all electrical input and output pins.
- End user cables are sealed with three cable glands.
- Provides a laser enable key switch for compliance with laser safety requirements.
- Input voltage range: 90 – 260 VAC @ 45 – 65 Hz.
[/x_block_grid_item]
[/x_block_grid]
[x_clear]
Communications
Industrial Bus Module
For connecting the gauge to industrial communications buses, such as used with PLCs.
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2015/02/anybus.jpg”][/x_block_grid_item][x_block_grid_item]
* May be field retrofitted.
[/x_block_grid_item][/x_block_grid]
| Protocol | Proton part number |
|---|---|
| DeviceNET | 00043MC006 |
| PROFIBUS | 00043MC022 |
| PROFINET | 00043MC031 |
| EtherNet/IP | 00043MC005 |
[x_clear]
Stands and Guards
Base Plate
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2015/02/00050MC042.jpg”]
Proton part number: 00050MC042
[/x_block_grid_item]
[x_block_grid_item]
* For securing a SL/SLR mini gauge to a mounting surface.
[/x_block_grid_item]
[/x_block_grid]
3D Adjuster Plate
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2015/02/00050MC044.jpg”]
Proton part number: 00050MC044
[/x_block_grid_item]
[x_block_grid_item]
- For use with the above Base Plate (00050MC042) for precision alignment of the SL/SLR mini gauge to the measured object.
- Provides ±3° of roll and yaw adjustment.
[/x_block_grid_item][/x_block_grid]
Laser Protection Tube for SL/SLR mini 3060
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2015/02/00050MC037.jpg”]
Proton part number: 00050MC037
[/x_block_grid_item]
[x_block_grid_item]
- Enclosure of the laser beam to within 10mm of the object for laser safety requirements.
[/x_block_grid_item][/x_block_grid]
Vibration Reducing Kit
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2015/02/00050MC043.jpg”]
Proton part number: 00050MC043
[/x_block_grid_item]
[x_block_grid_item]
- For use with the above Base Plate (00050MC042) in high-vibration environments.
[/x_block_grid_item][/x_block_grid]
Laser Protection Tube for SL/SLR mini 1220
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2014/05/adjustable-beam-enclosure-tube.jpg”]
Proton part number: 00050MC033
[/x_block_grid_item]
[x_block_grid_item]
- Enclosure of the laser beam to within 10mm of the object for laser safety requirements.
[/x_block_grid_item][/x_block_grid]
[x_clear]
Protection
Air Wipe
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2014/05/airwipe.jpg”]
Proton part number: 00050MC034
[/x_block_grid_item]
[x_block_grid_item]
- High-efficiency, air-wiped protection window for dusty/steamy environments with a quick-change window release mechanism.
- Provides an 8 mm push fit tube fitting to connection to a clean air source.
[/x_block_grid_item][/x_block_grid]
[x_clear]
Cooling
Cooling plate
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2015/02/00050MC031.jpg”]
Proton part number: 00050MC031
[/x_block_grid_item]
[x_block_grid_item]
- Air or water cooled plate for installation between the gauge and mounting surface.
- For use in ambient temperatures up to 60°C.
[/x_block_grid_item][/x_block_grid]
[x_clear]
Calibration accessories
SL Calibration Case
Portable on-site calibration system
[x_line]
[x_block_grid type=”two-up”][x_block_grid_item class=”img-center”][x_image src=”/wp-content/uploads/2019/08/SL-Calibration-Table-H180.jpg”]
Proton part number: 00020TL750
[/x_block_grid_item]
[x_block_grid_item]
- Motorised aluminium calibration wheel mounted in a rugged aluminium frame carry case.
- Displays speed and length.
[/x_block_grid_item][/x_block_grid]
[x_clear]
