InteliSENS® SLmini-i4

SPEED & LENGTH MEASUREMENT

The SLmini-i4 measures flat surface products in “roll to roll” or “cut to length” processes, such as paper, film, foil, gypsum board, textiles, roofing, sidings, wovens and non-wovens.

Non-contact, high accuracy measurement is ideal for drive control and for when length measurement is critical for product quality.
The SLmini-i4 connects easily to all standard control systems.

Very small and easy to install
No moving parts, increased reliability and MTBF
No slip, no wear, no marking of the product being measured
Full integration with PLC, or use standalone.
Industry 4.0 data communications
Pulse outputs that simulate and replace an encoder
Permanent calibration, minimal maintenance

Categories: New Product, Speed and length measurement

Request A Quote

Performance

	SLmini 1220-i4	SLmini 3060-i4
Stand Off Distance	120 mm 4.72”	300 mm 11.81”
Depth of Field	20 mm 0.8”	60 mm 2.36”
Minimum Speed	0.2 m/min 0.66 ft/min	0.3 m/min 0.98 /ft/min
Maximum Speed	2000 m/min 6562 ft/min	3000 m/min 9843 ft/min

Connectivity

6x pulse outputs
5 Vdc output or custom supply up to 25 Vdc. Max 1 MHz. Configurable to 6x single end pulse outputs; 1x differential quadrature output; 3x single end quadrature outputs; 3x differential outputs. Opto-isolated when using PSU-BOB or BT100.

5x logic inputs
3 Programmable Inputs: Zero Length, Speed Pause, Length Pause, Forward-Reverse
2 Fixed inputs: Laser enable and Shutter enable
Max. input voltage: 30 Vdc

3x logic outputs
Configurable to: Gauge OK; Gauge too hot; Good reading; Object detected; Preset length 1 / Batch length reached; Preset length 2 / Batch length reached; Gauge measuring speed.

MODBUS RTU, PROTON ASCII code or Label Printer
USB using RS232 – USB Converter Cable
RS485 MODBUS RTU, PROTON ASCII code (Not available with PROFIBUS)

Ethernet Modbus TCP (or ‘Ethernet TCP/IP’); Ethernet UDP
OPC UA compatibility: OPC UA 1.03

iBUS (PROFIBUS, PROFINET, EtherNet/IP)
Serial communications: RS232

Wi-Fi for gauge configuration and diagnostics.

Laser Doppler

Class 3B visible laser
Laser wavelength: 650 to 670 nm (typically 658 nm)
Maximum laser output power per beam (2 beams in total): 25 mW per beam, total 50 mW