InteliSENS DGK2000-DC

Diameter Gauge

The InteliSENS® Dual Axis Diameter Gauge, does much more than measure diameter. LED and CCD Technology coupled with our specially designed Optics provide Super Fast diameter and position measurement. This technology has no moving parts, no
wear, no drift. The extremely powerful FPGA processor used in the DGK Diameter Gauges enable Super Fast Measurements. 5,000 scans per second per axis in standard configuration which can be increased to 10,000 scans per second per axis. Additional options add functionality to measure, control, alarm and report on product quality.
Get the Proton MDIS App

  • SMFD Single Measurement Flaw Detection
  • PI Diameter Controller
  • FFT Analysis
  • SPC
  • Statistics

Performance



DGK-2015-DC DGK-2030-DC DGK-2060-DC
Minimum Diameter 0.2mm
7.8mil
0.2mm
7.8mil
0.3mm
11.8mil
Maximum Diameter 15mm
5/8"
30mm
1 3/16"
60mm
2 23/64"

Scan Speed

10,000 Scans / Second (5,000/Sec/Axis)
20,000 Scans/ Second (10,000/Sec/Axis) Option

Accuracy

Factory Calibrated to ±1μm for diameters < 15mm (5/8”) ± 3μm for diameters >15mm (5/8”) within gauge center area and a 0.05% error outside of center.
Gauge Output Resolution 1μm

Measurement Mode

Solid, Glass, Helix (Twisted, Multicore, Envelope Diameter)

Units

Diameter Measurement selectable mm, Inch
Speed and Length selectable m/min, ft/min


Measurement Technology

LED Light Source and Collimated Optical Lens provides a broad light beam across the measured part surface. The CCD receiver is scanned at 5,000 or 10,000 times per second to measure diameter, position and optionally surface flaws.

Image

Connectivity

1 Speed Input

Pulse Input 250kHz max frequency, 30v or 50v max pulses on two distinct input
Analogue input 0 -10vdc
Required for Helix Mode, Tolerance Location and Optional SMFD and PI feedback diameter control

2 Logic Inputs

Logic Input x 2

Maximum input Voltage 24 Vdc
User configurable function Reset, Print

4 Relay Outputs

Relay Outputs x 3

Maximum Voltage 24Vdc Current 1A
Gauge OK, Upper Tolerance, Lower Tolerances, Single Measurement Flaw Detection(SMFD)

1 Serial I/O

CANbus x 1

RS232 Modbus Communications
USB using RS232 - USB Converter Cable

1 CANBUS

CANbus x 1

Connects to Proton Products Cdi Display

Image

1 i-BUS

i-BUS x 1

Ethernet TCP/IP Modbus is the Default Communication.
Connect to a PLC using optional ProfiBus, ProfiNet or EtherNet Industrial Protocol

Image Image Image

Connectivity - Options

3 Analogue Outputs

±10 Vdc output of diameters or errors


Electrical and Operating Requirements

Power Supply
18-30 Vdc 

Power Consumption
30 Watts 

Operating Temerature
5c - 45c (41-113F)

Environmental Protection
IP 65


Size & Weight

DGK2015-DC


Height
230mm (9.1”)
Width
248mm (9.8”)
Thickness
64mm (2.5”)
Weight
3.4kg (7.5lbs)

Image

DGK2030-DC


Height
300mm (11.8”)
Width
310mm (12.2”)
Thickness
56mm (2.2”)
Weight
5kg (11lbs)

Image

DGK2060-DC


Height
475mm (18.7”)
Width
435mm (17.1”)
Thickness
66mm (2.6”)
Weight
8kg (17.6lbs)

Image